6-300m3/H Water Purification Equipment for HVAC System
Quartz sand filter removes impurities from raw water to achieve water reuse.
Filter is automatic operation and backflushing, under control system of dpswitch
(pressure drop), butterfly and PLC control system.
* How does the quartz sand filter works
Raw water passes inside water distributor into filter media layer (quartz sand), which let impurities stay at sand layer. Clean water flow out stably from water collector. When the pressure drop reaches the given value, the cleaning cycle is started. The rinse control start working at pressure drop value at 0.05-0.15MPa, return to 0.02-0.04MPa after back flushing. Quartz sand inside tank mixed with coarse and fine sands.
They are allocated above water distributor averagely. Even in back flushing, water consumption is little.
Tank inside has rubber line and plastic line for option. It is for anti-corrosion,
Which ensure a tank can be used 10-20years.
The completed filter control system has finished already in factory.
** Where to use quartz sand filter
Swimming pool, hotel spa, water entertainment, aquarium, fish farm
Irrigation in agriculture
Drinking water pre-treatment
Industrial recycled water, central air-condition system
***Attentions in using
1. When quartz sand filter first into use, users should clean sand firstly, after that to start filtration.
2. Turn all operating valves slowly, to avoid water impact.
3. Keep sharp or hard things away from filter.
4. Keep away from fire and high temperature.
5. Make sure sand is clean when not using.
****How to install?
Before installing a quartz sand filter, please make sure the ground is strong and even. The space is big enough for connecting pipes, valves and repair.
The filter needs changes sands after using some time. Follow below steps one by one:
1. Take down control valve
2. Pour sand into tank, by covering a protective cover at the inlet to avoid sand inside
After replacing new sand, return control valve, connect tightly. Remember there's a pressure gauge, but not fasten it tightly. Make sure each pipe connection is correct and no leak.
|Single Flow Rate||6-300m3/H |
|Design Pressure||7.5-16 bar |
|Water inlet pressure||2.5-3 bar |
|The Range of Working Temperature||20-120 (68-248)|
|Seal Type||O-ring and Washer |
|Connect Method||Flange |
|Surface Treatment||Matt Spray Beads, Mirror Polishing, Electropolishing |
|Control Method||Differential pressure switch, pneumatic butterfly valve, PLC|
|Filter sand type||Quartz sand, manganese sand, activated carbon, Anthracite, fiber ball, resin |
|Filter medium supply||We can supply different kind filter medium and combination|
|Equipment Chamber Material||Carbon steel 304ss or 316L|
|The key of filter effect||water distribution and catchment technology|
WELCOME TO INQUIRE, WE WILL OFFER YOU THE BEST ITEMS !