0.5micron Dn100mm 1.6mpa Pharmaceuticals Cosmetics Bag Filter
1. Description of bag filter
1. Large liquid treat capacity
2. Large dirt capacity
3. High filter efficiency
4. Simple operation
5. Low cost maintenance
2. How bag filter works
Wide availability of liquid filtration equipment. It can effectively remove liquid particles of different sizes, so as to achieve liquid filtration, purification, separation, recycling purposes.
Components: Filter container, filter basket, filter bag. We can install many bags in filter container according to customer requirements. The liquid enter into the container through side or bottom. Filter bag expand symmetrical in case of liquid wallop. The liquid will be out from bottom as well as the impurities stay in the filter bag. When the filter process has completed, the operator just loosen the bolt and rotate the hand wheel to enhance the cover to remove filter bag, then clean or replace the filter bag.
Working pressure: 0.05MPa-0.6MPa
Working temperature: 5 º C -40 º C (special temperature can be customized)
Filtering Accuracy: 1μ M-800μ M
Single bag Flow: 6.0 m3 / h-12.0 m3 / h
Operation mode: Manual or automatic control
Cylinder Material: 304, 316L
1, Standard: GB, American Standard, German standard, Japanese standard, customized; Single bag, parallel bag, multi-bag, cartridge;
2, Models: S, T series, PBF polypropylene containers etc.,
3 Rated flow: 6, 10, 23, 51, , , 1088 tons / hour
4 Rated working pressure: 10, 20, , kg / cm2
5 Cylinder Material: 304 stainless steel (inside and outside blast or polished) or customized materials;
6 High-strength support basket: By uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm;
7 Inlet and outlet: 1-14 or customized;
8 Inlet and outlet Location: Side into and side out, side into and bottom out, top into and bottom out, top into and side out or customized.
9 Interface Type: Flange, screw thread or customized.
10 Bag model: And non-calibration;
11 Filtration precision: 1-800um (microns) relative or absolute precision;
12 Seal ring material categories: General nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials;
13 Type of bag: Pure polypropylene, polyester, wool, viscose fiber, aromatic polyamide, Teflon, nylon and other materials;
14 Structure of bag: Single screen (surface filtration structure, pore size of 100 to 800 microns), needle felt cloth (three-dimensional structure of fluffy deep filter, pore size of 1 to 200 microns) and melt blown nonwovens (deep bed filtration structure, pore size of 1 to 100 microns) three, and there are a variety of ~ 800 micron filtration precision to choose from, in order to meet the requirements of different production processes. Acid, high temperature and other characteristics of the bag material can be adapted to different filtered liquid chemical compatibility requirements.
Paint, Beer, Vegetable oil, Pharmaceuticals, Cosmetics, Chemicals, Petroleum products, Chemicals, Electroplating solution, Milk, Mineral water, Hot solvents, Latex, Industrial water, Coatings and paints, Sugar, Molasses, Resins, Inks, Industrial waste water, Juice, Cooking oil, Wax, Precision filters and other industries.
|Q' ty of filter bag||Filter square||Inlet & outlet Dia||flow rate(m3/H)||Withsand pressure(MPA)|
|DLQ 03-2#||Φ 500||3||1m²||DN100||120||0.6-1.6|
|DLQ 04-2#||Φ 600||4||2m²||DN125||160||0.6-1.6|
|DLQ 05-2#||Φ 650||5||2.5m²||DN125||200||0.6-1.6|
|DLQ 06-2#||Φ 700||6||3m²||DN150||240||0.6-1.6|
|DLQ 08-2#||Φ 800||8||4m²||DN200||320||0.6-1.6|
|DLQ 10-2#||Φ 1000||10||5m²||DN250||400||0.6-1.6|
|DLQ 12-2#||Φ 1000||12||6m²||DN250||480||0.6-1.6|
|DLQ 16-2#||Φ 1200||16||8m²||DN300||640||0.6-1.6|
|DLQ 20-2#||Φ 1400||20||10m²||DN300||800||0.6-1.6|
|DLQ 24-2#||Φ 1400||24||12m²||DN350||1000||0.6-1.6|
WELCOME TO INQUIRE, WE WILL OFFER YOU THE BEST ITEMS !